While changing the tire or brake pad, you’ll need to lift your Jeep Wrangler. You can adjust the jack stand to the jack point to lift your vehicle safely.
Jack’s points on Jeep Wranglers might vary depending on the specific model. They are mostly found behind the front and rear. It’s located on the driver’s side. If it’s not there, check some other points as well.
Don’t worry! The process of jacking up the Jeep Wrangler is relatively easy. You just need to know where to find it and how to do it correctly.
Table of Contents
Where Are the Jack Points in a Jeep Wrangler?
Jack points of Jack Wrangler ate mostly found on the trunk of the driver’s side. If you still don’t find the jacking point, find it in the realtor wheel arch. And the last possible thing is your Jeep Wrangler jack point can be found under the motor.
Most vehicles have their jack points on the trunk. But the Jeep Wrangler has a lot of models with various updates. So, this might be tricky to find a jack point for some.
Moreover, you would not want to waste your time during emergencies. You must know where the jack point is, whether you want to change the Wrangler tire or reach some equipment like a brake pad.
To lift your vehicle, you must carefully adjust the jack stand to the jack point. Jacking up will have access to the tire and other equipment.
To avoid confusion, you can check the owner’s manual with the vehicle.
Different Types of Jacks to Use on Jeep Wrangler
Every Jeep Wrangler owner knows the importance of having a quality jack to help you avoid sticky situations on the trail. With so many options out there, it can be tough to choose the right one.
That’s why I’ve shared different types of jacks you can use on your Jeep Wrangler.
- Floor Jacks: These are the safest and most user-friendly jacks. They can lift your Wrangler at least 3 to 15 inches, making maintenance or tire changes a breeze. I recommend the Arcan floor jack for its top-notch quality.
- Bottle Jacks: These jacks are smaller and more portable than floor jacks, making them ideal for trail use. They work by pumping hydraulic pressure to lift your Jeep. I suggest the Torin 4-Ton Bottle Jack.
- Scissor Jacks: These jacks are commonly found in most vehicles as part of the emergency kit. They are compact and lightweight and work by using a simple mechanical design. I recommend the Torin Big Red Scissor Jack.
- Hi-Lift Jacks: These jacks are designed for off-road use, particularly in deep mud or snow. They have a long handle, and you can lift your Jeep high from the ground. The Hi-Lift Jack HL485, a 48-inch Red All Cast Jack, is one of our top picks in this category.
You can use many types of jacks on your Jeep Wrangler. Each has its pros and cons, depending on your specific needs.
Try to consider factors such as weight, size, and purpose before making your choice. With the right jack by your side, you’ll be ready to tackle any obstacle on the trail.
What Size Jack Do I Need for Jeep Wrangler?
If you’re wondering what size jack you need for your Jeep Wrangler, let me share some factual data with you!
Based on my research, a 3-ton jack is recommended as it can lift up to 6,000 lbs, which is sufficient for most Jeeps.
Additionally, you should invest in at least 2 jack stands for added safety. I highly recommend checking out Harbor Freight, as they have great options for jacks and jack stands.
If your Jeep is lifted, the popular choice is a 48″ jack, while hi-lift jacks are available in 36 “-60” for more extreme lifts.
For most Wranglers, a 2-ton jack should suffice, but if you go off-roading frequently or have a more extreme lift, a 3.5-ton jack may be necessary.
Personally, I have a 2″ lift and use a jack with a 23″ lift and 12-ton jack stands for added stability. Don’t forget to consider the loading capacity based on the weight of your specific Jeep model.
I hope this helps you find the perfect jack for your Jeep!
2012 and 2013 Jeep Wrangler Jack Points
Both the 2012 and 2013 Jeep Wrangler have jacking points located on the axle tubes at the ends of the front and rear axle tubes. To get more specific, center your scissor jack under the axle tube corner closest to the wheel you want to raise.
Alternatively, you can use the rear differential in the middle of the two wheels to lift the Wrangler. Just remember to be careful when using the front and rear cross members, a pinch weld, or any other spot to lift or support your vehicle.
Lastly, don’t forget to check out the rear storage compartment for your jack and lug wrench!
How to Change a Tire on a Jeep Wrangler?
You might want to know the use of jack point. Whether you want to change the tire or change the brake pad, the process of using the jack point is similar. Here you’ll know the process of changing the tire.
Let’s check how you can change your Jeep Wrangler tire using jack points:
- The very first step is to find the jack point and place the jack into it.
- Then, turn on the claps counter of the jack. Turn it in a counterclockwise direction, and you can lift the tire from the ground.
- Get some lug wrenches and use them to lose all the lug nuts. When you remove the lug nuts, the tire can pull the wheel out easily.
- It’s time to reverse the previous steps and adjust a new tire for your Jeep Wrangler. Ensure you’re using the lug wrench properly to tighten each nut.
Safety Considerations When Jacking Up Your Jeep Wrangler
While jacking up your Jeep Wrangler, you should maintain some precautions. Especially if you’re not professional and doing it for the first time, you must be extra conscious.
These are the things you can never skip while jacking up the Jeep Wrangler:
Securely Position Jack Stands: You should place the jack strand on a smooth and flat area. If the surface is soft/ bumpy/ inclined, this can make your Jeep fall/ lean.
Check Tire Pressure First: Jeep Wrangler tire pressure stays around 35 to 38 PSI. While changing the tire, you should check the front and rear tire pressure. There should be a balance to maintain a safe and sound driving experience.
Ensure that the Vehicle is Level: While using jack stands, lift the Wrangler wisely. Place it at some point where you can easily reach all the equipment underneath the Wrangler.
Do Not Place Anything Under the Tires: The common mistake people make is placing any supporting thing under the tire. Well, this is not necessary if you’re using a jack stand.
Be Cautious When Lowering the Jeep Wrangler: While you lower the Wrangler and remove the jack stand, follow the steps consciously. This should not damage your Jeep or cause any accidents.
Wrap Up
Well, there are different processes for each version of the Jeep Wrangler. You can watch it here to learn jacking up a Jeep Wrangler practically.
Once you find the jack point, the other process of changing equipment is easier.
