How To Lift A Jeep Wrangler – 10 Quick And Easy Tips

Lifting a Jeep Wrangler can seem like a daunting task, but it doesn’t have to be. If you are planning to lift your Jeep Wrangler, there are a few simple tips that can simplify the process.

The purpose of this post is to provide tips on how to lift a Jeep Wrangler for off-road maintenance and service or general lifting.

Here are 10 quick and easy tips that will make the process a little bit easier.

Note- You can apply this guide to lift any Jeep Wrangler, including YJ, JL, JK, TJ, 1997 Jeep Wrangler, and more. Keep in mind that this guide relates only to lifting your Jeep for maintenance purposes.

Why Lift Your Jeep Wrangler?

There are several reasons why you lift your Jeep Wrangler. In some cases, people do it primarily for repairing purposes, like making their vehicle appear taller and more aggressive.

Some people use it to improve the performance of their cars off-road or to make it easier to get over obstacles.

It doesn’t matter why you want to lift your Jeep Wrangler, there are a few things you need to know before you begin. Following are other reasons to lift a Jeep Wrangler:

  • Many people lift their Jeep Wrangler to improve its off-road capability. A higher ground clearance makes it easier to navigate obstacles and a better suspension system makes it easier to handle rough terrain.
  • Another reason to lift your Jeep Wrangler is for aesthetic reasons. Lifted Jeeps typically look more aggressive and tough, which might be a big selling point if you wish to steal people’s attention.
  • For those who live in regions where there is a lot of snow, lifting your Jeep Wrangler is also a practical option. With a higher clearance, it will be easier to avoid getting stuck in the snow, while a better suspension system will make it easier to drive on ice.

Whatever the reason for lifting your Jeep Wrangler, it is imperative that you do your research to identify a reputable company/person to assist you in the process. You can easily achieve the desired look or performance with a little bit of planning.

10 Ways on How To Lift A Jeep Wrangler

There are many ways you can lift your Jeep. But below are the top 10 best ways to lift a jeep wrangler that you can follow.

(1) Use Jack Stands to lift a jeep wrangler

When you are lifting a Jeep Wrangler, you should use jack stands for increasing stability and safety. These 5 easy tips will help you lift your Jeep quickly and easily without any problems:

  • Before you begin your work, make sure that the surface you are working on is even and solid. This will help ensure that your Jeep does not wobble or slip while it is lifted.
  • Always use jack stands when lifting a vehicle/Jeep. It provides an added level of stability and safety, preventing the vehicle from falling in case something goes wrong.
  • Lift one end of the vehicle at a time, using either a hydraulic or scissor jack. This will minimize unnecessary stress on the suspension system.
  • Be careful not to pinch your fingers when lowering or raising the car; whenever working with heavy machinery, take care.
  • If you do not feel comfortable lifting a Jeep Wrangler yourself, ask for assistance from a knowledgeable individual.

(2) Lifting a Jeep Wrangler with a Jeep Car Lift

When you need to lift your Jeep Wrangler, we recommend using a JEEPS Car Lift. Jeep car lifts are specifically designed for Jeeps and other four-wheel-drive vehicles. It is quick and easy to use, and it is a safe way to lift. When using Jeep car lights, remember to:

  • Use the proper safety equipment. This includes gloves, eye protection, and sturdy shoes.
  • Read the instructions carefully before using the lift.
  • Inspect the lift and your Jeep before using it.
  • Follow all safety procedures while lifting your Jeep.

(3) Lift a Jeep Wrangler using an ATV Jack Stand

Another way to lift your Jeep Wrangler is by using an ATV Jack stand. This method is very convenient since you can place the ATV jack stand anywhere under your Jeep.

Upon placing the jack stand, all you need to do is pump the handle to lift your Jeep Wrangler. Furthermore, ATV jack stands are quite affordable and readily available in the market.

When using your ATV jack stand, make sure it is positioned on a firm and level surface. Do not forget to check your Jeep’s wheels before lifting them.

(4) Lift a Jeep Wrangler by placing cables beneath the vehicle

Using cables is the best option if you want to lift your Jeep Wrangler easily. You can easily purchase a set of cables from most hardware stores, and they are very simple to use.

You must place the cables underneath the Jeep to lift it. It will provide the necessary support for you to lift the object safely. When you are performing this task, you should have someone assist you, since it can be difficult to do by yourself.

Once the cables are in place, pull them slowly upwards until your Jeep is lifted from the ground. You must be careful not to apply excessive force, because this may damage both the vehicle and the lifting system.

(5) Lifting a Jeep Wrangler with a floor jack

Another option for lifting a Jeep Wrangler is to use a floor jack. You can use this method when changing the tires on a jeep wrangler.

Also, it is fairly simple to use floor jacks to raise the Jeep wrangler. Ensure that the floor jack is properly secured under the frame of the Jeep so that it will not slip out of place while you are raising it.

(6) Use body lifts to lift your Jeep Wrangler

If you desire more height than a lift kit provides, you can add body lifts to your Jeep Wrangler. Body lifts attach directly to your frame and allow you to increase your Jeep Wrangler’s height without changing any of your suspension components.

(7) Install shocks/struts with higher spring rates

You can also increase the height of your Jeep Wrangler by installing shocks and struts with higher spring rates. This will give you an extra inch or two of ground clearance and make the ride a little harsher.

While not recommended for daily driving, this will get you through those deep ruts when you go off-roading. It may be necessary for you to use a body lift if you regularly climb rocks.

(8) Lift a Jeep Wrangler using tire ramps

If you want, you may use any other above method to lift your Jeep Wrangler. But the simplest and most commonly used method is to use tire ramps. A tire ramp is specifically designed for lifting Jeep, and they make the process much easier and safer.

Here are 5 quick and easy tips on how to use tire ramps to lift your Jeep Wrangler:

  • Make sure that the tires you want to lift are on the ramp surface. The ramp should be positioned so that the tires you want to lift will rest securely on top of it.
  • Place the ramp(s) in front of the Jeep. The front bumper should rest against the back of the ramp(s). It will be easier to lift the Jeep with this in place.
  • Place something heavy behind each wheel. This will help keep them from rolling off of the ramps while you’re lifting them. You can use cinder blocks or bricks as a solution.
  • Use a ratchet strap (or two ) around each wheel. This will prevent them from moving while you are raising your Jeep Wrangler.

(9) Lift a Jeep Wrangler with a Crane

You can use a crane, jacks, ropes, and pulleys. When using a crane to raise a Jeep Wrangler, you should ensure that the weight of the vehicle is evenly distributed on the lifting device.

Otherwise, you could damage both the vehicle and the crane. It is also important to make sure that there is enough clearance between the ground and the crane’s hooks or claws for them to grip properly.

You should loosen the bolts and screws that hold your car together before lifting it. By doing so, nothing will be damaged during the lifting process.

When everything has been removed, you can safely lift your vehicle into the air using the crane.

(10) Lift a Jeep Wrangler with a winch

This is another popular method. A winch is essentially a motorized pulley system that can be used to pull or lift heavy objects.

Also, a winch can be used to apply large amounts of force. It uses a series of pulleys. Winches are available in many sizes and capacities, which makes it imperative that you select the proper one for your Jeep Wrangler.

To use a winch to lift a Jeep Wrangler, you will need:

  • A strong anchor point on the ground (like an iron post or large rock)
  • A cable or chain long enough to reach from the anchor point to your Jeep Wrangler
  • The appropriate tools for attaching the cable/chain to your Jeep Wrangler.

Some Safety Tips

  • Always use caution when lifting or lowering your vehicle.
  • Use jack pads or plates to distribute the weight of the car evenly over the surface area of the jack stand. In this way, you can avoid damaging your vehicle or injuring yourself.
  • Raise your Jeep slowly and steadily, using only enough force to avoid damaging any components on the vehicle.
  • Before raising your vehicle off its wheels completely, apply wheel chocks.


Can lifting a Jeep cause problems?

Lifting a Jeep can cause problems if it is not done correctly, but it also has the potential to provide many benefits.

How much does it cost to lift a Jeep Wrangler?

The average cost of lifting a Jeep Wrangler is approximately $600 to $1,200. The price range will vary depending on the type of lift kit you choose and the model year of your Jeep Wrangler.

You can read: How Much Does It Cost To Wrap A Jeep Wrangler?


So there you have it – 10 quick and easy tips on how to lift a Jeep Wrangler. Whether you are looking to do a basic lift or go all out with an even more extreme modification, these tips will help get you started.

Just be sure to always consult with an expert before starting any modifications, and always adhere to the safety guidelines provided by the manufacturer.

Rate this post

Hi, I am Ashley Kiser a professional automotive blogger. I have worked in the automotive industry for over 5 years. I am passionate about cars and love sharing my knowledge with others. I hope this blog will help you make the best decisions when it comes to your car.

Leave a Comment